Machine Vision Knowledge Base

12.5X Zoom Lens for Optical Encoder Disc Inspection 12.5X Zoom Lens for Optical Encoder Disc Inspection

12.5X Zoom Lens for Optical Encoder Disc Inspection

A 512 P/R metal encoder disc inspected with a 12.5X zoom lens and a 2 MP camera: real fields on a 1/2-inch sensor, illumination choices and what the images prove.

14X Zoom Lens for Laser Decapsulation: Die Imaging Case 14X Zoom Lens for Laser Decapsulation: Die Imaging Case

14X Zoom Lens for Laser Decapsulation: Die Imaging Case

How a 14X continuous zoom lens and a 12 MP camera image a chip during laser decapsulation, and what an inclined axis does to focus and depth of field.

Diffuse vs Collimated Backlight for Dimensional Measurement Diffuse vs Collimated Backlight for Dimensional Measurement

Diffuse vs Collimated Backlight for Dimensional Measurement

The difference between diffuse and collimated backlight is not brightness but edge position: t·tanα decides whether a measured diameter drifts with part thickness.

Lighting for Metal Surface Scratches: Dark Field Without Guesswork Lighting for Metal Surface Scratches: Dark Field Without Guesswork

Lighting for Metal Surface Scratches: Dark Field Without Guesswork

Why bright field hides scratches on machined metal, how low-angle dark field makes them visible, and how to set angle, azimuth and surface roughness limits before promising a detection rate.

PCB AOI Lighting: Coaxial, Low-Angle and RGB in One Cell PCB AOI Lighting: Coaxial, Low-Angle and RGB in One Cell

PCB AOI Lighting: Coaxial, Low-Angle and RGB in One Cell

Three optical problems on one PCB — pad reflectance, solder topography and silkscreen colour — need three different illuminations. How to combine them without wasting frames.

Motorized Zoom Lens for PCB Inspection: Selection and Integration | POMEAS Motorized Zoom Lens for PCB Inspection: Selection and Integration | POMEAS

Motorized Zoom Lens for PCB Inspection: Selection and Integration | POMEAS

How to select and integrate a motorized zoom lens on a PCB inspection line: magnification-to-feature matching, RS-232 program positions, and where fixed optics fit.

Optical Surface Profiler Guide: WLI vs Point Confocal vs Focus Variation | POMEAS Optical Surface Profiler Guide: WLI vs Point Confocal vs Focus Variation | POMEAS

Optical Surface Profiler Guide: WLI vs Point Confocal vs Focus Variation | POMEAS

Optical surface profiler guide: WLI vs point confocal vs focus variation, PSI/VSI mode selection and WLI100 specs for 3D topography and roughness.

PCB AOI Lens Upgrade: 17.3 mm to 12 mm or 8 mm FOV PCB AOI Lens Upgrade: 17.3 mm to 12 mm or 8 mm FOV

PCB AOI Lens Upgrade: 17.3 mm to 12 mm or 8 mm FOV

Keep your AOI camera and light, shrink the field of view from 17.3 x 17.3 mm to 12 x 12 or 8 x 8 mm. The magnification maths, lens routes and WD cost.

Optical Metrology OEM Modules: Design-to-Production Verification Checklist Optical Metrology OEM Modules: Design-to-Production Verification Checklist

Optical Metrology OEM Modules: Design-to-Production Verification Checklist

A six-gate qualification path for optical metrology modules, from optical feasibility to change control, with the specification fields that actually transfer.

Go Back Top
VK Message
WhatsApp

Scan QR Code

WhatsApp QR Code
Wechat

Scan QR Code

Wechat
Phone Number
+8618598102007
Copied!
Online Message

Online Message

Click to refresh