- Page 16

PMSOpticDll SDK V4.4.7: Motorized Lens Control API

PMSOpticDll SDK V4.4.7 exposes 44 functions for motorized zoom lens control over serial or TCP, with dual-motor and encrypted control-card families documented.

Zoom Lens Pulse Position: Magnification Mapping Explained

How POMEAS motorized zoom lenses map optical magnification to absolute pulse position, with two complete factory pulse tables and the reading trap in summary tables.

Zoom Lens Parfocality and Centering: Adjustment SOP

Step-by-step parfocality and centering procedure for continuous zoom lenses: 5 steps each, a 0.01 mm pass criterion, and why parfocality must be adjusted first.

Motorized Zoom Lens RS-232 Protocol: 5 Commands Explained

RS-232 command reference for POMEAS motorized zoom lenses: five ASCII commands, both position formulas, the 0x55 stop byte, and why the link pauses while the motor moves.

Camera Module Die-Cut Measurement: 60s to Under 5s per Part

Die-cut parts for camera modules: a supplier cut per-part inspection from 60 seconds to under 5 with the POMEAS IMAGE 3 Pro system - no fixtures, 100% inspection.

Watch Case Dimension Measurement

See how a watch component maker cut case inspection from 3-5 minutes to seconds per part with the POMEAS IMAGE 3 instant vision system - non-contact, micron-level.